ASSA ABLOY

Table of contents

This example shows the required configuration to enable the ASSA ABLOY door-lock solution.

  • fqdn, ip-address - has to be replaced with the FQDN or IP address of the Assa-Abloy server
  • username - has to be replaced with the username on the Assa-Abloy server
  • password - has to be replaced with the password of the Assa-Abloy server
  • accessid - has to be replaced with the Assa-Abloy server access id
  • ap-group - has to be replaced with the AP group name the configuration should be enabled on (multiple statements are required for multiple groups) (ArubaOS only)

ArubaOS

iot radio-profile "zb-int"
    radio-mode none zigbee
!
zigbee service-profile "int-no-sec-auto"
    radio-instance internal
    security disable
!
ap-group <ap-group>
    iot radio-profile "zb-int"
    zigbee service-profile "int-no-sec-auto"
!
iot transportProfile "Assa-Abloy"
    serverType Assa-Abloy
    serverURL "https://<fqdn|ip-address>[:<port>][<path>]"
    username <username>
    password <password>
    deviceClassFilter assa-abloy
    include-ap-group <ap-group>
    accessID <accessid>
!
iot useTransportProfile "Assa-Abloy"

Aruba Instant

iot radio-profile zb-int
 radio-mode zigbee
 exit

zigbee service-profile int-no-sec-auto
 security disable

iot transportProfile "Assa-Abloy"
 endpointURL "httts://<fqdn|ip-address>[:<port>][<path>]"
 endpointType Assa-Abloy
 payloadContent assa-abloy
 username <username>
 password <password>
 accessID <accessid>
 exit

iot use-radio-profile zb-int

zigbee use-service-profile int-no-sec-auto

iot useTransportProfile "Assa-Abloy"